Spring pans off

Today I tackled the spring removal. I ordered a 3' long 3/8"-12 ACME and cut it to 12" long with my Dremel cutting wheel. Replaced the 2 front bolts and left rear bolt with the rods. Of course I'm new to this so I placed a big vise just in case....didn't want any surprises! Very controlled. You can probably remove the pan with only two rods but better safe than sorry. 

Bought theses type long nuts to be used as spacers. 

On top of the spring pan there are three bolts with washer and nut on the bottom. One washer and nut on top right front hole to hold the stabilizer bar.